Cart
Items: 0
Total: $0.00
Click on image to zoom

1199 Panigale Supersport Set

1199SS
Availability: This part is built to order.
Pricing: $966.00

Customize Your Item

- -
 * required
- -
Qty:
Free Shipping!

Description

This set includes:

1199UR Upper Race w/adapter $258.00
1199LS Left Side $142.00
1199RS Right Side $142.00
1199B Belly $142.00
1199T Supersport Tail $189.00
1199F Fender $93.00

Don't forget your heat shield.

Fitment

Intake plate: Remove plastic intake plate from the top of stock
headlight. Drill dimples on fiberglass plate to accept M-5 screws.
Screw plastic plate to fiberglass plate with M-5 screws. Holes in the
plastic part are a little too tight for the screw, I recommend opening
them up so that M-5 screw threads in tightly so nuts are unnecessary.
Line up the intake plate assembly with headstock opening. Use the
large central divot to attach the assembly to the stock radiator
shroud where the stock upper and headlight attach from below with nut
and bolt. Angle may be adjusted by using the stock grommet and/or
washers. This will hold the tube in place when the upper is not on the
bike and make installation of the upper easier.

Remove muffler assembly as directed in kit pipe
directions. Install Termi front mount to engine prior to pan install.
Drill 2 holes in both sides of pan bottom to accept M-5 well nuts to
facilitate sidepanel mounting. Press in well nuts from outside.
Drill the two holes at the rear mount to slip onto studs at rear of
oil sump. There is a third dimple on the bottom that may be drilled
out to accept a rubber plug which allows access to the oil drain plug
with a wobbly socket, it also doubles as a drain for rain race
conditions. Oil changes without a hole here will be unpleasant. Drill
the two dimples on both sides where the front muffler screws must go
through. Slip front of pan on to the radiator shroud, it will "cup"
into place. Raise rear to slip onto sump studs and affix with M-5
nuts, regular nuts are easier to use than the stock flanged ones.
Muffler front bracket should now be inside the pan and line up with
drilled holes. Adjust hole size/shape as needed. Finish pipe install
as directed. Heat shielding is highly recommended in the front
cylinder header area. A standoff spacer may be necessary with large
bore header.

Details

Categories

Shipping Information

  • Item Requires Shipping
  • 20.0 lbs.
  • W23.0000” x H22.0000” x L40.0000”
  • Free Shipping!
  • This item ships in its own box.



Share 1199 Panigale Supersport Set on Facebook

Buy With Confidence

Extensive Selection

Covering all of your bodywork needs.

Low Prices Everyday

Got a special project? Let us know!

Superior Customer Service

Find the answers to commonly asked questions.

Safe & Secure Shopping

  • Visa
  • Mastercard
  • American Express
  • Discover
  • PayPal
Credit Card Processing
WSM SSL Comodo Secure Site